Online Store - HANS

Replacement tether - Upgrades your existing HANS sliding tether. Replacement sliding tether for Quick Click type helmet anchors. Includes 2 tether carriers and 4 screws. Standard 18" / 450cm length works in most applications.

All tether lengths offer the same level of protection.
**Does not include anchors.

Replacement tether - Upgrades your existing HANS sliding tether. Replacement sliding tether for Quick Click type helmet anchors. Includes 2 tether carriers and 4 screws. Standard 18" / 450cm length works in most applications.

•All tether lengths offer the same level of protection.

•**Does not include anchors.

This extra large helmet bag is designed for those drivers that use the Hans Device. It is large enough to fit your helmet and device inside the bag. The bag features a lined interior that is easy to clean and three external storage pockets and one vented mesh pocket. The bag also has a foam inner liner to better protect your helmet.

Extra Large Size

Fits Both Your Helmet and Hans Device

Three External Storage Pockets

One External Mesh Pocket

Washable Inner Lining

Impact Absorbing Inner Foam Liner

Padded Shoulder Strap

Hand Strap With Velcrow Closure

Black And Red Bell Racing Design

11 1/2" wide, 14 1/2" tall and 18 1/2" long

This extra large helmet bag is designed for those drivers that use the Hans Device. It is large enough to fit your helmet and device inside the bag. The bag features a lined interior that is easy to clean and three external storage pockets and one vented mesh pocket. The bag also has a foam inner liner to better protect your helmet.

Extra Large Size

Fits Both Your Helmet and Hans Device

Three External Storage Pockets

One External Mesh Pocket

Washable Inner Lining

Impact Absorbing Inner Foam Liner

Padded Shoulder Strap

Hand Strap With Velcrow Closure

Black And Red Bell Racing Design
11 1/2" wide, 14 1/2" tall and 18 1/2" long

Replacement tether - Upgrades your existing HANS sliding tether. Replacement sliding tether for post anchor and post collar type helmet anchors. Includes 2 tether carriers and 4 screws. Standard 18" / 450cm length works in most applications.

All tether lengths offer the same level of protection.
**Does not include anchors.

Two QD loops ONLY. For use with Quick Disconnect tethers. Requires QD tethers to attach to device. Buy extra loops for additional helmets.

Two standard HANS® tethers. Easily attaches to rear of device. Replace tethers after impact or every 2 years.

Replacement tether - Upgrades your existing HANS sliding tether. Replacement sliding tether for post anchor and post collar type helmet anchors. Includes 2 tether carriers and 4 screws. Standard 18" / 450cm length works in most applications.

•All tether lengths offer the same level of protection.

•**Does not include anchors.

Two QD loops ONLY. For use with Quick Disconnect tethers. Requires QD tethers to attach to device. Buy extra loops for additional helmets.

For 2011, the Snell foundation has announced a helmet standard (SAH2010) that allows helmet makers to permanently bond a nutwasher inside their helmets. This makes attaching a HANS Device helmet anchor easier as you simply screw the anchor into the helmet. As you know from past anchors, the point of the post anchor and the tethers of the HANS Click Quick anchors should point rearward after installation. Older helmets with a moveable nutwasher inside the helmet can orient the anchor by rotating this inner nutwasher. As this is not possible with the SAH2010 fixed nutwashers, HANS has designed a collar system that can be rotated from outside the helmet. These anchors ship with a small wrench designed to facilitate this feature. If you have an SA-rated helmet (not SAH rated), you can use the collar-style anchors but they will come with the nutwashers that are installed inside the helmet.

These anchors can be used with SA and SAH rated helmets.

The anchors for the SA helmets include nutwashers that are installed INSIDE the helmet.

The anchors for the SAH helmets do not include nutwashers.

Two quick disconnect "stock car style" tethers complete. Fits all devices. Easily attaches to rear of device. Includes 2 of each - QD tethers, shackles, orange pull tabs and QD loops.

Two quick disconnect "stock car style" tethers complete. Fits all devices. Easily attaches to rear of device. Includes 2 of each - QD tethers, shackles, orange pull tabs and QD loops.

Accessory gel padding for HANS Devices. Includes two shoulder pads and fits medium, large and XL devices. Soft medical gel pad may address comfort concerns, especially from those with a ridge where a broken collar bone has healed.

Padding is covered in Nomex fabric color of your choice.

Padding fits medium, large and XL devices.

Quick Click (TM) helmet mounted attachment allows instant connect or disconnect. Works with sliding or fixed tethers. Tethers sold separately.

Quick Click (TM) helmet mounted attachment allows instant connect or disconnect. Works with sliding or fixed tethers. Tethers sold separately.

Accessory gel padding for HANS Devices. Includes two shoulder pads and fits medium, large and XL devices. Soft medical gel pad may address comfort concerns, especially from those with a ridge where a broken collar bone has healed.

Padding is covered in Nomex fabric color of your choice.
Padding fits medium, large and XL devices.

Replacement tether and post collar style anchors for one device.

Sliding tether upgrade with standard post collar anchors.
Comes with all parts to convert one helmet and one HANS Device.
Standard 18"/450mm tether length.

Replacement tether and post collar style anchors for one device.

•Sliding tether upgrade with standard post collar anchors.

•Comes with all parts to convert one helmet and one HANS Device.

•Standard 18"/450mm tether length.

This kit will convert one HANS Device to a Quick Click system. Contains tether carriers, nutwashers, tether and full instructions Medium length fits all HANS Devices except size Extra Large

The Quick Click with sliding tether kit is pictured.

This kit will convert one HANS Device to a Quick Click system. Contains tether carriers, nutwashers, tether and full instructions Medium length fits all HANS Devices except size Extra Large

The Quick Click with sliding tether kit is pictured.

Value Priced - Injection molded super structural carbon fiber - Same performance as other HANS Devices. The Super Small Sport is designed for youth racers or small adults with a neck measurement under 14.5". If not sure of size, please contact us.

EACH DEVICE INCLUDES STANDARD HELMET ANCHORS, SLIDING TETHERS, BLACK PADS AND INSTRUCTIONS

Click here for Sizing and Model Information

Weights - depending on size/model - PRO weighs roughly 1 lb., EXTRA weighs roughly 1 ½ lbs, SPORT weighs roughly 2 ¼ lbs

Value Priced - Injection molded super structural carbon fiber - Same performance as other HANS Devices. The Super Small Sport is designed for youth racers or small adults with a neck measurement under 14.5". If not sure of size, please contact us.

EACH DEVICE INCLUDES STANDARD HELMET ANCHORS, SLIDING TETHERS, BLACK PADS AND INSTRUCTIONS

Weights - depending on size/model - PRO weighs roughly 1 lb., EXTRA weighs roughly 1 ½ lbs, SPORT weighs roughly 2 ¼ lbs

Value Priced - Injection molded super structural carbon fiber - Same performance as other HANS Devices

EACH DEVICE INCLUDES STANDARD HELMET ANCHORS, SLIDING TETHERS, BLACK PADS AND INSTRUCTIONS

Weights - depending on size/model - PRO weighs roughly 1 lb., EXTRA weighs roughly 1 ½ lbs, SPORT weighs roughly 2 ¼ lbs

Value Priced - Injection molded super structural carbon fiber - Same performance as other HANS Devices

EACH DEVICE INCLUDES STANDARD HELMET ANCHORS, SLIDING TETHERS, BLACK PADS AND INSTRUCTIONS

Click here for Sizing and Model Information

Weights - depending on size/model - PRO weighs roughly 1 lb., EXTRA weighs roughly 1 ½ lbs, SPORT weighs roughly 2 ¼ lbs

The Hans Sport Series II Device offers all the same safety performance as the other Hans Devices, but features an all new rounded collar and recessed sliding tether. The new design not only saves on weight (lighter then the basic Sport - heavier then the Pro), but allows for easier entry/exit in many smaller, tighter vehicles. Constructed from an injection molded super structural carbon fiber, the Hans Sport Series II is available with a 20-degree layback and in Medium or Large sizes.

EACH DEVICE INCLUDES ONE SET OF HELMET ANCHORS, SLIDING TETHERS, BLACK PADS AND INSTRUCTIONS

Click here for Sizing and Model Information

Weights - depending on size/model - PRO weighs roughly 1 lb., EXTRA weighs roughly 1 ½ lbs (EXTRA model is no longer available), SPORT weighs roughly 2 ¼ lbs, SPORT II weighs roughly 2 lbs

HANS - Sport Series - Sport II
Same performance as all HANS Device models.
Injection molded – lighter than Sport I, heavier than Pro Series.
Smaller collar, new DuPont polymer reduces weight.

The Sport II is only available for upright seats at about 20 degrees.


Post Anchors come in two styles, Standard and the new Cam Collar style. Check your Snell Sticker! If you have the new SAH2010 rated helmet with the threaded HANS anchor already embedded you must use the new Cam Collar Anchor. All other SA-rated helmets (SA2000, SA2005 and SA2010) require the Standard Post Anchor.

Quick Clips now come in two styles, both compatible with SA- and SAH-rated helmets. The standard Quick Clip attaches to the helmet, with the loop-end of the tether hooking to the clip. The new Quick Clip 2 includes a metal tab attached to the tether that clicks into the quick release on the helmet

The Hans Sport Series II Device offers all the same safety performance as the other Hans Devices, but features an all new rounded collar and recessed sliding tether. The new design not only saves on weight (lighter then the basic Sport - heavier then the Pro), but allows for easier entry/exit in many smaller, tighter vehicles. Constructed from an injection molded super structural carbon fiber, the Hans Sport Series II is available with a 20-degree layback and in Medium or Large sizes.

EACH DEVICE INCLUDES ONE SET OF HELMET ANCHORS, SLIDING TETHERS, BLACK PADS AND INSTRUCTIONS

Weights - depending on size/model - PRO weighs roughly 1 lb., EXTRA weighs roughly 1 ½ lbs (EXTRA model is no longer available), SPORT weighs roughly 2 ¼ lbs, SPORT II weighs roughly 2 lbs

The HANS Adjustable, which meets the SFI Foundation’s Spec. 38.1 for head and neck restraints, enables all drivers to purchase a HANS with full confidence of a comfortable fit no matter what type of car or racing seat they use. Previously, customers ordered a HANS Device in a fixed angle according to the driver’s physical size and type of seating position in the car -- such as an upright seat in stock cars or a reclined seat in open-wheel machines. “Because it’s adjustable in five-degree increments, this new HANS will improve the fit and comfort for all racers,” said HPP co-founder Jim Downing. “Our goal is to bring the award-winning safety of HANS to all drivers in any type of car, especially the weekend warriors who too often put themselves and their families at risk. A study conducted by the Charlotte Observer found that racing deaths in the U.S. actually increased in the decade after Dale Earnhardt Sr.'s fatal accident at Daytona in 2001 due to fatalities on weekly short tracks and drag strips. “We believe the new HANS is going to create another revolution in head and neck restraints, especially for the weekend warrior,” said Downing. “For over a decade, the HANS has demonstrated its ground-breaking safety technology all over the world in all types of crashes, including multiple impacts and oblique impacts. The HANS Adjustable is another huge step forward. There’s no reason why every driver should not be wearing a HANS head and neck restraint.” The HANS Adjustable is eligible for use in most U.S. racing series. NASCAR, which conducts its own evaluations, currently has the HANS Adjustable under consideration for approval. After passing all the required strength tests, the new device is under final consideration by the safety committee of the FIA, the international sanctioning body.

Adjusts in 5 degree increments from 10 to 40 degrees & available in sizes medium & large.

EACH DEVICE INCLUDES ONE SET OF HELMET ANCHORS, SLIDING TETHERS & INSTRUCTIONS

Weight - 970 grams - this is heavier than the Sport II (770 grams) but lighter than the original Sport (1,110 grams)

Free helmet anchor installation is available with purchase

The HANS Adjustable, which meets the SFI Foundation’s Spec. 38.1 for head and neck restraints, enables all drivers to purchase a HANS with full confidence of a comfortable fit no matter what type of car or racing seat they use. Previously, customers ordered a HANS Device in a fixed angle according to the driver’s physical size and type of seating position in the car -- such as an upright seat in stock cars or a reclined seat in open-wheel machines. “Because it’s adjustable in five-degree increments, this new HANS will improve the fit and comfort for all racers,” said HPP co-founder Jim Downing. “Our goal is to bring the award-winning safety of HANS to all drivers in any type of car, especially the weekend warriors who too often put themselves and their families at risk. A study conducted by the Charlotte Observer found that racing deaths in the U.S. actually increased in the decade after Dale Earnhardt Sr.'s fatal accident at Daytona in 2001 due to fatalities on weekly short tracks and drag strips. “We believe the new HANS is going to create another revolution in head and neck restraints, especially for the weekend warrior,” said Downing. “For over a decade, the HANS has demonstrated its ground-breaking safety technology all over the world in all types of crashes, including multiple impacts and oblique impacts. The HANS Adjustable is another huge step forward. There’s no reason why every driver should not be wearing a HANS head and neck restraint.” The HANS Adjustable is eligible for use in most U.S. racing series. NASCAR, which conducts its own evaluations, currently has the HANS Adjustable under consideration for approval. After passing all the required strength tests, the new device is under final consideration by the safety committee of the FIA, the international sanctioning body.

Adjusts in 5 degree increments from 10 to 40 degrees & available in sizes medium & large.

EACH DEVICE INCLUDES ONE SET OF HELMET ANCHORS, SLIDING TETHERS & INSTRUCTIONS

Weight - 970 grams - this is heavier than the Sport II (770 grams) but lighter than the original Sport (1,110 grams)

Click here to view the HANS Adjustable Brochure

Click here to view FAQ from HANS

Free helmet anchor installation is available with purchase

HANS - Adjustable™

Adjustable angle from 10 to 40 degrees fits all types of cars and seats.


Easy to adjust in 5 degree increments – providing more comfort.


Choice of medium or large collar width fits 90% of all drivers.


Note: NASCAR approval of the HANS Adjustable is pending. Prior to NASCAR approval, if your immediate plans include NASCAR-sanctioned events please choose another model.

Featuring light weight and a low collar, the HANS Pro Ultra provides the same protection as the HANS Professional used worldwide by drivers in major racing series since 2001. Made from carbon fiber, the new HANS Pro Ultra carries a feather graphic on the new style collar signifying its low weight.

All devices come with two helmet anchors, sliding tethers and complete fitting instructions

Click here for Sizing and Model Information
Weights - depending on size/model - PRO weighs roughly 1 lb., EXTRA weighs roughly 1 ½ lbs, SPORT weighs roughly 2 ¼ lbs
SFI & FIA Approved.

Lower rounded head

Canted legs to sit better on the body

Lighter weight

Higher appaulettes to help keep harness belts on the shoulders.

Featuring light weight and a low collar, the HANS Pro Ultra provides the same protection as the HANS Professional used worldwide by drivers in major racing series since 2001. Made from carbon fiber, the new HANS Pro Ultra carries a feather graphic on the new style collar signifying its low weight.

All devices come with two helmet anchors, sliding tethers and complete fitting instructions

Weights - depending on size/model - PRO weighs roughly 1 lb., EXTRA weighs roughly 1 ½ lbs, SPORT weighs roughly 2 ¼ lbs

SFI & FIA Approved.

Lower rounded head

Canted legs to sit better on the body

Lighter weight

Higher appaulettes to help keep harness belts on the shoulders.

The Professional Series HANS device is made from High Modulus Carbon Fiber and weighs approximately 1 pound, offering industry leading protection in a comfortable, lightweight package. Comes standard with black padding.

Fits most racers in most cars. Choose from a variety of laybacks, anchor attachments and sizes. See the HANS sizing chart


SFI and FIA rated